French Design: Shotguns

Recently, in the incomparable 2Blowhards * , Donald Pittenger was carblogging. He described how the French carmaker Panhard, in the Thirties, made an attempt to make cars with the steering in the middle, and with curved windows on the sides.


He explains plausibly why this was not a success, though I would rate the car’s esthetics a bit higher than he does.

But it got me to wondering why the French always seem to make things that look different, in cars (Panhard, Citroen) and in other things. One object that I am more than familiar with is the French shotgun. There have been many odd French gun designs, some as weird as the Panhard, but one that persists, even if it does not conquer, is the Darne. It has been in continuous production since the 1890’s because it is GOOD!

Most double shotguns, like this old American Parker, “break” on a hinge between the barrels and the action. The barrels drop down when you move a lever on the top, or, less commonly these days on the bottom, sideways.

This is the near- universal standard in guns these days, from Russian and Brazilian models worth a couple of hundred dollars to English “Bests” like Purdeys that now go for over $100,000. For many reasons– for instance, you can see at a glance if it is loaded or not, and so can your companions (yeah, though it didn’t help the Veep’s buddy)– it will doubtless continue to be.

But the design has a few inherent problems. All that flexing eventually makes for wear, and even a Purdey must someday go in for repair.

And that interrupted topline isn’t as sleek as that on, well, this pair:

The dark one is my little 28 gauge quail gun; the silvery one is my big “ball and shot” twelve, the one shotgun so far I have ever had made for me. See those little tabs behind the action? When you pull them up , the breech block slides open, backwards, while the barrels remain in place.


The frame is as rigid as a muzzleloader’s. Darnes never wear out– they just get smoother. And in the old days, they built elephant caliber guns on the same frames, with no extra reinforcement.

Some think they are weird. I love their looks and function.

And they cost a hell of a lot less than Purdeys.

(* Recently Michael Blowhard paid us a touching compliment, saying that “Querencia gets my vote in the category of Best (and Broadest) Range of Interests …” Thanks, Michael, but I can’t accept that– without a doubt, it is true only of 2Blowhards.)

94 thoughts on “French Design: Shotguns”

  1. French engineering is not only superb, but incessantly inventive. Sometimes this produces step changes in design and functionality , which work, like the Darne shotgun.
    However beautiful in it’s handling and finish ,the design has a fundamental fault , in that it is impossible to reload in a hurry, so that may be one reason it it never really caught on with mainstream shooters, but still a perfect choice for walked up game .
    Think of the wonderful innovative Citroen oil filled suspension sysems , and Concorde( a joint UK / French venture, I admit ), but designs like those were ahead of their times.
    However, the downsied is that sometimes the French complicate perfectly functional articles , and sometimes introduce unreliability as a result.
    Anyway we should rejoice in French Engineers and their quirkness, they make life interesting!

    Reply
  2. “the silvery one is my big “ball and shot” twelve, the one shotgun so far I have ever had made for me”

    I agree about their looks but have never used one so I know zip about the functionality. I want one, though. Is the 12 bore set up with rifle sights for slugs? It looks like it in the photos but it is hard to see. I assume Paul Bruchet made it.

    Sliding breech guns are elegant but it is tough to find one to fit a lefty like me.

    Reply
  3. “the silvery one is my big “ball and shot” twelve, the one shotgun so far I have ever had made for me”

    I agree about their looks but have never used one so I know zip about the functionality. I want one, though. Is the 12 bore set up with rifle sights for slugs? It looks like it in the photos but it is hard to see. I assume Paul Bruchet made it.

    Sliding breech guns are elegant but it is tough to find one to fit a lefty like me.

    Reply
  4. Hi Walt

    If you really want to drool, and see the best of Herve Bruchet’s “Darnes ” visit http://www.fusildarne.com/ and be wowed by some of the finest gunsmithing available anywhere today !
    A great investment for your Grandchildren as well!- Art & Function.

    JohnnyUK

    Reply
  5. Hi Walt

    The “fusil darne ” site has only been up and running since just before Christmas, so I suppose it will take time for the search engines to pick it up.
    I will mention it to Herve when I next contact him – I am his unofficial ( i.e non commercial ) Champion in UK !
    Hope you feel that it is worth the wait!!

    JohnnyUK

    Reply
  6. Walter: re the big Darne: it does indeed have rifle sights in what they call a “duckbill” or half rib. I added screw- in rifled chokes by Briley that will put two Brenneke slugs into the same hole at 75 yards! It also has ic & mod for birds. The younger Bruchet, Herve, made it.

    Most of the good double gun shops will now bend a stock with hot oil etc, and Briley has a new proprietary process that is supposed to be even easier, so don’t despair of getting a left- hand bend. Just find the gun you like, with the right length, and bend it.

    Johnny: do you know our friend John Hill? Or are you he?

    Great Darne sites. May have to post more on the gun.

    Reply
  7. Steve, I am under the impression that Darnes are not “bendable”. They have a metallic rod from the action into the stock that does not allow for bending. At least that is what Ted Schefelbein told me about my Darne/Halifax. I can post his description if wanted.

    JC/SCL

    Reply
  8. Here is Ted’s answer to my stock bending query:
    JC,
    The problem on a gun like your Halifax is as follows. Running down through the wrist on your gun is a strange little piece of steel tube, in the shape of a rod, with sharp wood screw threads on the outside, and metric machine screw threads on the hollow inside. When Mr. Darne worker in the twenties, or thirties, or whenever attached the stock to the receiver/watertable, he stuck that rod in some pig fat, and screwed the thing AS TIGHT AS HE COULD GET IT into the wood of the stock. Then, he bolted the receiver to the wood using the internally machined threads in the rod. Sometimes, a 10 mm bolt is inserted from the other end, under the buttplate, on two piece Darne stocks, but this is ‘sorta redundant, and not always found on a given gun. Bending the stock isn’t an option on a gun like this, and you will be disappointed at best, and rewarded with a broken stock at worst. That long, external wood screw rod cut threads into the stock decades ago, (ever seen a Darne with a broken wrist? That steel rod down the middle makes ’em tough as hell) and even if it did bend, likely would never hold the stock properly again. Don’t attempt it, is my advice.
    Best,
    Ted

    Hope I helped.

    JC/SCL

    Reply
  9. Hi JC/ SCL

    I must say that most Darne shotguns that I have seen to date are “straight stocked” i.e no cast .
    However, I am sure that Herve Bruchet would be able to “breathe” on the woodwork of a new, bespoke gun , and provide “cast on” , or “cast off” to suit a specifiers requirements .
    When I discussed this aspect with him about a possible new gun , ( as I need around 3/8 in cast on myself),I am sure that he said that he could build cast into the new stock when it was made, rather than bend it !
    I suggest therefore that you contact him directly about whether it is possible to change the cast of an existing gun, but one with a stock bolt would be difficult.

    Hope this helps

    JohnnyUK

    Reply
  10. Hi JohnnyUK, thank you for the feedback. What I needed for my Halifax was reducing drop and considering it is around a century old (12ga./65mm chambers) I simply went the add-on pad way.

    BTW I am new at this blogging thing and I don’t want to be too anonymus. SCL is the airport designation for Santiago – Chile, where I am from.

    Cheers, JC

    Reply
  11. Have an exquisite little 28ga, imported by firearms center, Victoria, Texas year unknown. Looked on your fusildarnewebsite, could not get it to come up in English tonight, will try again.
    Maybe I can lean some more about these fine guns. Also picked up a well used, lightly engraved Charlin a few weeks ago, incredibely smooth action!!

    Reply
  12. JJ– if your gun is case colored and lightly engraved with a straight grip, like mine, it is one of 25 28 gauge R11’s imported by James Wayne of Victoria TX in the late 60’s. They are as far as I know the only 25 R11 28’s ever made (info direct from Mr. Wayne on the phone a few years ago). We are part of a “set”!

    If it is a different configuration but from Victoria it is still a James Wayne import. He should be in the phone book.

    Reply
  13. Steve:

    Mine is French Gray and engraved in a floral, rosette pattern, has horn forend tip.

    Ted Schefelbein thought it was an R-12. Don’t really know, has no grade marks on barrel “flats.”

    Reply
  14. Hi JJ

    As I said earlier,the “fusildarne” website was only established by Herve Bruchet just before Christmas. He is intending to to translate the site into english , but has not yet mangeged to get around to it!.It will be there soon!

    The 28g’s are exquisite!, and pretty collectable, but Herve is making them again!

    JohhnyUK

    Reply
  15. Steve., Talked to Mr Wayne this morning really delightful fellow. He determined that mine is a R-15, straight grip, horn forend tip,gray finish. I had to tell him how to remove sliding breech to determind action type. He also thought it “strange” that mine does not have “obutrator”(sp) disks, but that it is no big deal.
    He also explained that the straight crossbolt safety was his idea for American shooters.
    Really appreciate the info and his name.
    Also order a copy of your book good guns, hope it will contain a bit more info and will be looking forward to the English translation of the fusildarne site by Herve

    Thanks again
    Jeff

    Reply
  16. The Darne: An English gunsmith, now in Pennsylvania, looked at my almost Darne (JohhnyUK told me that lots of imitation Darnes were made, usually pretty good). The gunsmith said, “Very French.” When asked what that meant, he said, “Complex but simple to operate, well balanced, and it looks very good indeed.” And it did.

    Paradoxically, the Darne never caught on I think because it requires some complex engineering. Break-open doubles can either be made exquisitely (Purdeys) or churned out cheaply from a Turkish factory. Not so with Darnes; not at least until computerized milling. And also, they did look ‘strange’. But come to think of it, what could be stranger than a shotgun that breaks open in the middle?

    Why don’t I have a Darne now (except for the counterfeit)? Mostly because their resale value is low as it is for anything ‘strange’. In fact, I was warned against buying one by another Englishman, a gun fitter. I am old and one of these days my widow will need to sell my guns. Why burden her?

    But thank heaven for M. Bruchet. And maybe more rational shooters will recognize the Darne design for the gem it is.

    Reply
  17. Steve:
    Just got a copy or your Good Guns Again and really enjoyed. Was actually looking for more information on the Darne, not much but found that you likes mirrored mine closely.
    I really like my Darne and an ancient looking Charlin 16 ga. Had picked up one of the highly engraved silver SKB’s in a Rod and Gun club in Izmir, Turkey back in early 70’s. Later acquired a nice Parker GH and find it points very well in spite of pistol grip.My son
    shot his first round of skeet with this gun not knowing what it was and found that he much preferred the configuration over newer more popular types. Also have one of the nicer Orvis(Gruella) sidelocks.
    Had to give my son his grandfathers old Stevens 16 ga double.
    In rifles give me the Marlin lever actions, also like a couple of Win. mod 94 centinnels with pistol grip, crescent buttplate, 26″ half octogen barrel and 3 shot button magazine ( this handles and points similar to a nice shotgun).
    Dad got me one of the last Mod70 featherweights when I finished high school in ’63. My real pride is a Ruger #1 light rifle in 7×57 I found at a gun show for a song. It looked horrible, no rust or scratches but stock looked as though it had set in bright sun for years. After much scraping and fine sanding and many coats of linseed and Lin-speed it is now beautiful
    Also agree with you on handguns, S&W cannot be beat out of box, have “matched” K-22 and K-38 which will go to Son some day.

    After this will try some of your other publications.
    Jeff

    Reply
  18. Very interesting on the darne deal, well any of you fellers know anyone with a 12 gauge block they want to sell?? I need the the no4 fussil halifax block …interesting story on why its missing you can e_mail me at barbara_b11@yahoo.com please help

    Reply
  19. I was just searching blogs,and I found your site, Friend! I like it!
    Please accept my compliments and wishes for your happiness and success.
    If you have a moment, please take a look at my site:
    credit center
    It pretty much covers credit center related issues.
    All the best!

    Reply
  20. Hello;
    Can anyone tell me anything about Peugeot over under shotguns?
    None of the well known gun dealers (gfuys who sell $100,000.00 guns) can tell me anything. I know Peugeot made guns- like Yamaha they made lots of different things-
    including tools and Bicycles.
    Certainly could use some help here
    fisherwillypete@aol,com

    Reply
  21. Onto Peugeot guns:

    I can confirm that. When Peugeot was not yet so famous as a carmaker, it also manufactured shotguns. I guess this happened at the beginning of the last century, but like you said nobody, even famous gun retailer, knows about this.
    Well, when my aunt was emptying her country house in Italy, we found one: a pretty nice Peugeot over under with fine incisions and, unfortunately some rust as well. I think my aunt still has it.
    It is hard to believe but it is almost impossible to get any informations on these guns…

    Roy

    Reply
  22. Wish I knew more about Charlin. Louis Drake seems to think they all slide on roller bearings. Of course the one he sold recently was featured in DGJ and was sourvenired to a Pratt&Whitney engineer by a Maharaja who presumably admired aeroplanes.

    Jack

    Reply
  23. Just bought a Charlin 12 from Thad Scott in Miss. Strait stock, cased, no engraving. Doesn’t have the Darne belly band.

    Jack

    Reply
  24. I am interested in buying some Peugeot Darnes guns, and I need prices of each model. If anyone knows, leave a comment here.

    Reply
  25. It’s interesting to see that french fixed barrel guns have a great reputaion overseas.
    Concerning the last message, I know that theres some web sites in France on which you can find darnes and charlin guns (and also soleihac, which are copies from Darne, as Peugeot guns). In case of, I can post the corresponing links.
    For people who are familiar with french languague, a book on the Darne history was also published and it still available.
    I would also point out that the Manufrance IDEAL gun is also famous for its original system.

    Eric
    User of
    Darne R10 16G
    Charlin 12G/16G
    Manufrance IDEAL 328 16G
    Maisonnial 20G

    Reply
  26. Hello Steve,

    The links are the following and translated in english: you can find books and old guns and you will find a very rare Charlin.

    http://www.lehussard.fr/
    http://www.lehussard-librairie.com/catalog/product_info.php?products_id=723
    http://www.lehussard-librairie.com/catalog/product_info.php?products_id=124
    But all the books for Darne and Ideal are in french.

    And also if you want to buy a Charlin:
    http://www.seasons.fr (adds): I’vejust bought a Charlin on it.
    http://www.armes-occasion.com/catalog/product_info.php?cPath=2_3&products_id=306

    Eric

    Reply
  27. I was recently in a gun shop in Paris where they had an unusual shotgun for sale. This gun had no firing pins, but rather uses some sort of electrical ignitioin system, and of course specisl shells. I’d like to learn more about it, but I’ve forgotten the mnufacturer’s name. Do you know?

    Reply
  28. Here is more detail on the Charlin if it will help you anyone tell me what my Charlin 16 ga. is worth. It has L.C-1 ON IT AND HAS MATCHING SERIAL NUMBERS. THE BARRELS HAS A WORD +STETIENNE 17A ALSO HAS LETTERS PI AND STETIENNE HAS 65 ON IT .Will that help any on what its worth. And it is in good shape and the barrel is great shape.

    Reply
  29. Thanks Steve on the 2 & 3/4 in. shells. Have always shot 2&3/4 in. shells in it since it has been in the family since 1943.I was told once that the 64 marked on the bottom half of the gun was 64 mm and shoud shoot 2&1/2 in. shells in it. But like I said we have always fired 2&3/4 in. in it. Thanks Ken

    Reply
  30. Purchased my first 12 bore Stoeger import(Bird Hunter) Darne in 1973 used. Subsequently have R series 20 bore, another 12 bore(R15), a bespoke Bruchet/Darne(R11) in 16 gauge. The 16 has a double trigger system, where the front trigger will fire the barrels sequentially with two pulls! Absolutely the best handling upland guns ever manufactured.

    Reply
  31. Hello,

    I have a French made 16 gauge side by side shotgun that has been in my family for years. It is in excellent condition. It has not been fired in my lifetime. I’m 43.

    On the left side barrel it says: Fusil Robust Drevete S.G.D. G

    The right side barrel reads: Manufacture Francaise D’armes et Cycles De St Etienne

    The bottom says: No 10 Robust

    Removing the forearm there is a number: 41737

    Removing the barrel shows: Epreuve Officielle Superieure – stetienne 17 0

    cal 16 demi-choke perfectionne

    PT (with a crown over it)

    dharge d epreuve fusil T:2:93-30

    charge normale 7 (T?) :1.70-28

    canon frette fabrication mecanidue

    acier hercule

    There are also symbols with MF on either side of the symbol.

    I think the above words are correct, they are small and hard to see. I can take photos and post them on Yahoo! if that would help. Do you have any information on the gun like how much I can sell it for and if there is a dealer in my area? Southern Ocean county, New Jersey.

    Thank you very much.

    Wes Charles wesleygc@yahoo.com

    Reply
  32. Hi,
    I have a Darnes “St Etienne” Model#93 (MLE 1886 R35 SALM 1937)
    Military Rifle – Serial #13171 and don’t have a clue – Looking for any information about this rifle and approx. value. All I know, is that It was brought back from Europe after the war. Thanks for any help. Charles

    Reply
  33. Have you seen John Folse’s new “After the Hunt” cook book? It has a nice shot of the Darne sliding breech on p.760.

    With a rabbit recipe from Matt also and a note on falconry.

    Reply
  34. DARNE shotguns

    Can anyone tel me which model 12 guage Darne shotgun I own?
    It has no ingraving and is blued. The sliding breachblock is casehardened. It has a radiused V between the stock and the forend. It has no bone tip on the forend. It has a lever safety catch. I guess it is a R13 or R15.

    Can somebody please explain to me the protocol to disassemble the shotgun? I do not know how to get the reciever (barrels) from the armature table.

    Reply
  35. Corrie: It is an R10. To remove barrels: after you have removed the action (press tab under rear, slide off backwards) press down the “fork” in the action table, then rap the barrels sharply on the end with a wooden or plastic hammer. The barrels will come loose. To reassemble just reverse. Sliding the action back shut will tighten everything up.

    Reply
  36. Hi Folks – just found this site and want to say its great to see the Darnes getting some good wraps – I have had my Darne 12 Guage for 35 years and hope to be shooting with it for at least 35 more. One of the earlier commenters in the thread mentioned that they are impossible to load fast and I have to beg to differ on that – if you carry 2 shells in the fingers of your left hand(or right hand depenging on which one you are pulling the triggers with!) you can easily reload very very quickly by opening the breech with the trigger hand and then just dropping the shells in from the fingers of your other hand (takes a bit of practice but means you can get 4 shots off within a few seconds). I have used the technique when shooting pigs with a lot of success (my Darne has short barrels so its range is not great for bigger game and means I have to be fairly close to be sure of a clean kill) – love the gun and it just gets better with age (and still has very little recoil for such a light gun)

    Reply
  37. Hi Laurie

    Glad you too, like the Darne!

    I should explain my comments further about reloading the Darne quickly.
    In UK, game shooting is mostly either driven , or walked up.
    So, I am more than happy to use my V19 12G for walked up birds( or standing waiting for a Boar!),and a 12G magnum Darne for flighted duck or geese.

    However , I am sorry, but I still beg to differ with your comments, as for driven game, a succession of quick, double shots & reloads are often needed in a very short space of time, when a flush of birds is over you.( Maybe the only flush of your day!)
    Then nothing compares with a break action ejector, preferably an assisted opener!, and a handy, large opening pocket, brimming with cartridges
    Even better would be a pair of such guns and an experienced loader , I am told.

    I have yet to benefit from such a service !( But am open to offers?) .

    JohnnyUK

    Reply
  38. black mold exposureblack mold symptoms of exposurewrought iron garden gatesiron garden gates find them herefine thin hair hairstylessearch hair styles for fine thin hairnight vision binocularsbuy night vision binocularslipitor reactionslipitor allergic reactionsluxury beach resort in the philippines

    afordable beach resorts in the philippineshomeopathy for eczema.baby eczema.save big with great mineral makeup bargainsmineral makeup wholesalersprodam iphone Apple prodam iphone prahacect iphone manualmanual for P 168 iphonefero 52 binocularsnight vision Fero 52 binocularsThe best night vision binoculars here

    night vision binoculars bargainsfree photo albums computer programsfree software to make photo albumsfree tax formsprintable tax forms for free craftmatic air bedcraftmatic air bed adjustable info hereboyd air bedboyd night air bed lowest pricefind air beds in wisconsinbest air beds in wisconsincloud air beds

    best cloud inflatable air bedssealy air beds portableportables air bedsrv luggage racksaluminum made rv luggage racksair bed raisedbest form raised air bedsaircraft support equipmentsbest support equipments for aircraftsbed air informercialsbest informercials bed airmattress sized air beds

    bestair bed mattress antique doorknobsantique doorknob identification tipsdvd player troubleshootingtroubleshooting with the dvd playerflat panel television lcd vs plasmaflat panel lcd television versus plasma pic the bestThe causes of economic recessionwhat are the causes of economic recessionadjustable bed air foam The best bed air foam

    hoof prints antique equestrian printsantique hoof prints equestrian printsBuy air bedadjustablebuy the best adjustable air bedsair beds canadian storesCanadian stores for air beds

    migraine causemigraine treatments floridaflorida headache clinicdrying dessicantair drying dessicantdessicant air dryerpediatric asthmaasthma specialistasthma children specialistcarpet cleaning dallas txcarpet cleaners dallascarpet cleaning dallas

    vero beach vacationvero beach vacationsbeach vacation homes veroms beach vacationsms beach vacationms beach condosmaui beach vacationmaui beach vacationsmaui beach clubbeach vacationsyour beach vacationscheap beach vacations

    bob hairstylebob haircutsbob layeredpob hairstylebobbedclassic bobCare for Curly HairTips for Curly Haircurly hair12r 22.5 best pricetires truck bustires 12r 22.5

    washington new housenew house houstonnew house san antonionew house venturanew houston house houston house txstains removal dyestains removal clothesstains removalteeth whiteningteeth whiteningbright teeth

    Reply
  39. Web Art Sense a web design company is here for a purpose to make art and design of your imagination alive and real on the web platform. After several months of hunting of the best talent and struggling for the name of their design company they finally reached a vertical which engages their vision of togetherness. The best talented people in web designs have joined hands to compete and provide innovative, unique concepts to users/clients all across the globe. Web Art Sense is not any design company; they take real care of having your brands be presented that invokes your revelation to others who see it.

    Web Art Sense has their sales offices in London, New Jersey and New Delhi are heading towards marketing themselves to main continents of Europe, Australia and America. Web art sense already has ground foundation and is providing web based design development and SEO Services in countries like USA, UK, Australia and Italy. Web Art Sense has been growing above hundred percent every financial year since its foundation.
    Web Design Company

    Web Art Sense a leading web design company, affordable web design, web development, ecommerce, XHTML Services. Web Design Company offers a complete collection of web design solutions for business. Web Art Sense team of professionals with proven knowledge in the field of web design & development are skilled of providing high quality, e commerce websites, development and website redesign & maintenance solutions.

    Reply
  40. hello, my father died a year ago and i’m trying to sort through everything. one item i need to sell but do not know very much about is a shotgun, made in france. its a NICKERSON… Verney Carron a saint-Etienne. on my fathers certificate there a nu, serial nu and 12 bore. it’s in once only use and was brought around 1983. it’s been store away in a safe for years. can anyone tell me if this is a sort after shotgun, what they think it could be worth. i have someone who could be interested in but i haven’t a clue what value to put on it. it looks brand new. thank you

    Reply
  41. thank you for advise, will email you in the new year with some photos. took some with phone camera today doesn’t do the gun any justice. from A.F LONDON

    Reply
  42. DO I HAVE A DARNE OR A CHARLIN. DASASSEMBLED, MY GUN HAS MULTIPLE MARKINGS READINGPT WITH WHAT LOOKS LIKE CROWNS AND XS.ALSO STAMPS WITH ST ETIENNE 17.1 AND THE NUMBER 65 IN TWO PLACES.THE GUN ITSSELF IS A SIDE BY SIDE 16 GUAGE. DOUBLE TRIGGER.CHECKERED WALNUT STOCK. I HOPE THATS ENOUGH INFO.

    Reply
  43. I still can’t tell from that. Crowns are proof marks. 65 (mm) is chamber length. I believe both were made in St Etienne (Darne still is). Both made S x S 16’s with checkered stocks.

    Charlin has a smoother action than Darne– glides like on ball bearings– though maybe not as strong. I can tell from photos– email to “ebodio at gilanet dot com”

    Reply
  44. I have what I believe is a Darne R-10 SXS 16 ga. Could use some help in verifying this. On the underside of the barrels is the following info.

    Cannons Darne
    6.6
    Darne Brevete – S.G.D.G.
    Type 10
    6.6
    St. Etienne

    It also has a Crown over the letters PT in each corner.

    I would appreciate any comments / information. I am not very familar with the Darnes. More accustomed to american rifles and german pistols.

    Really enjoyed reading all of your comments on these shotguns.

    Brian

    Reply
  45. It is plain, no engraving. The serial numbers all match. Is there a web site with the manufacture dates by serial number? Would like to find out a little more about this particular shotgun. I really like the balance but will not have the opportunity to shoot it for a while. Live in the mountains and it has been snowing for what seems forever.

    Brian

    Reply
  46. New info from Johnny UK via email:

    "Sorry, but I am not up on Darne serial numbers, but if you look on Geoffrey Gournet's website , who is an agent for Herve Bruchet in US http://www.gournetusa.com/darne

    He shows the following info on dates :-

    SERIAL NUMBER FOR AFFIXED BARREL MODEL R V P & HS (Many Exceptions Occur)
    0-50000:up to 1910, one piece stock
    A001,A002…A999,B001…Z999:1910-1925
    AA001,AA002…BB001…ZZ999:1926-1935
    3A001,3A002…3B001…3Z999:1935-1948
    4A001,4A002…4B001…:1949-1955
    4Z 1955-1952
    5A001…5Z999:1962-1968
    6A…1968-1974
    7A…1974-1978
    8A…up to 8F 1978
    8G Bruchet
    8F890…8G204 1981-2004

    Other than that, the only answer is to contact Herve Bruchet http://www.fusildarne.com/

    Hope this helps

    Reply
  47. I recently purchased a 16 ga SxS shotgun stamped Montargis on the left barrel in front of the breech. Gun has swivels, ejectors, scalloped blue frame, straight grip stock, splinter fore end. Any info on the maker and the quality of this gun?

    Reply
  48. Johnny UK says:
    "I have no idea which manufacturer is referred to in this comment .

    I entered "Montargis shotgun" in Google and found these 2 references to guns sold in US Auctions – one says Belgian make, the other French – so maybe you can take your pick ?

    I wonder if the Barrels were made in Montargis – why there is a ref to A Montargis?

    https://www.rockislandauction.com/view_item.aspx?aid=45&iid=232293 – 20k –

    http://www.artfact.com/auction-lot/french-box-lock-double-barrel-shotgun-1-c-188qt0cs1d – 20k –

    Sorry not to be more helpful"

    Reply
  49. Previous comment:Verney Carron shotgun

    One item i need to sell but do not know very much about is a shotgun, made in france. its a NICKERSON… Verney Carron a saint-Etienne. on
    my fathers certificate there a nu, serial nu and 12 bore. it’s in once only use and was brought around 1983. it’s been store away in a safe for years. can anyone tell me if this is a sort after shotgun, what they think it could be worth. i have someone who could be interested in but i haven’t a clue what value to put on it. it looks brand new.

    Comment : Hi there. I agree with Steve, that unless it is a really high quality weapon, £450 for a really mint one in 12G Ej, would be a top price in the current UK market. Verney Carrons were marketed for a while in UK, mainly O/U ejectors – very light and handy – mainly machine made, slim , low action, with large scroll engraving . One drawback was a strange safety catch alongside the triggers, which was difficult to operate. Not a good feature in my opinion.
    I had one for a time, but sold it.
    I think they ceased manufacture some years ago.

    JohhnnyUK

    Reply
  50. This is a followup to my post of yesterday. Looking for info on this gun. Right barrel is marked Poichauvin AR 2. Left barrel is marked A Montargis. On the left barrel flat is stamped Choke Bored Perfectionne and Roncharc Cizfron. The flats also have a crown over the letters PT and the numbers 6.5. Each barrel has,forward of the flats, the number 17.0 and the left barrel has stamped Canon Surette over Double Epreuve with Garantie in between them, all in an oval shape.There are some other words/letters/markings but they are faint. The gun has swivels, straight grip and a splinter FE. Anyone have any ideas/knowledge on this gun? Thanks for any info. Mike

    Reply
  51. Verney Carron Update

    I was in coversation recently with Herve Bruchet , Head of Bruchet Darne,St Etienne, bespoke manufacturer of Darne sliding breech weapons, and the magnificent, new 20G. Damon Petrick O/U , and so I mentioned about the current situation concerning Verney Carron .
    It would appear that they are still in business at;-
    Verney-Carron SA
    54, Boulevard Thiers
    BP 80072
    42002 ST-ETIENNE Cedex 1
    FRANCE
    Phone 011 33 477 79 15 00
    Fax 011 33 477 79 07 02
    email@verney-carron.com
    http://www.verney-carron.com

    Hope this helps

    JohnnyUK

    Reply
  52. Dear Stephen,

    I read your blog as I was googleing about a similar french gun your blog describes. It’s hard to find decent material about it.

    My family had this shotgun hidden in attic for decades (it has no legal documentation). The barrel and everything else seems fine, just bit dusty. Do you think it has some rarity or value or it’s just a cheap old shotgun to hunt rabbits (or actually hunt swans, for what a local guy wanted to buy it from me with €150. Yes, some people eat swans…). Also I have couple pictures…

    Thanks

    Hans (hanspoiss@hot.ee)

    Reply
  53. Back in 2006 I asked if anyone could tell me anything about Peugeot Under/Over Shotguns. I could still use some help on this one. I know that there have been (and may well still be) at least two others in the USA, but that is about it. Anything since "06 ??

    Reply
  54. I absolutely love your blog and find almost all of your post’s to be precisely what I’m looking for. Does one offer guest writers to write content in your case? I wouldn’t mind creating a post or elaborating on a lot of the subjects you write regarding here. Again, awesome site!

    Reply
  55. Hi guys. Looking at a Charlin .16 ga. s x s. How do you remove the barrels? I see the button on the bottom which moves a spring in the action after sliding breech is open, but I can't figure out how to pull barrels and forearm off. Also, clarify for me the comments about 2 1/2" vs. 2 3/4" shells: which should I try, or do I try both lengths? Asking price for this sweet little gun is around 1,000. It's light-weight and really the kind of gun I like to shoot for turkey and so on. Thanks for any information you can share.

    Reply
  56. AnnRJ, I have a Charlin 12 gauge for 8 years. It is unique. I use it for trap and skeet and receive many comments about it. To separate the barrel open the breach about half. Hold the wrist with one hand and with the button on the bottom of the action pushed in tap the floor vertically with the muzzle. It should release, if not tap a little harder. Would you consider a trade? Ken @ kenkat@nikola.com

    Reply
  57. Hello, I have a Darne Halifax 16ga with 65mm chambers, serial number in the 50800 range. Any information regarding date of manufacture would be greatly appreciated.

    Reply
  58. I don't have the book of Darne serial numbers. You might Google Geoffrey Gournet, the engraver who also imports Darnes. The number seems high, but I bet they made a lot of Halifax guns.

    Shorter chambers imply older guns. I liked the old Halifaxes, which were often more balanced because they had long barrels and no monobloc, thereby avoiding the muzzle light tendencies of high grade Darnes that can make them hard for English and US shooters to hit with.

    Reply
  59. Hello sir-  I have a single shot, bolt action shotgun with an inside bore diameter (at the muzzle) of .477”, or 12.1158mm.  , or .472”.  It’s too big to be a .410, and too small to be a 32 gauge (.526”).  It has what looks to be a serial number, 10197.  Also "60 13.0”.  And some proof marks, a crude sketch of which I’ve attached.
    It's been suggested to me that this gun is French. It bears a proof mark, an X with four arrows projecting from the inner sides of the X. Above the X there are the letters PT, and above that is what looks very much like a crown. Any chance you can tell me what this is?  It’s not a high quality gun, has a very plain wooden stock, cheap nickel finish on the bolt, etc.  But I’m still curious.  Any help appreciated.
    -James

    Reply
  60. I just acquired a 28 gauge Fireams Center Inc. Darne R11 – case hardened, lightly engraved – straight stock – serialized 4S23 on lever, sliding block, barrel and chassis

    Unfortunately mine has had Buttstock replaced – blonder walnut that does not match forearm.

    From your post and one here ..https://www.tapatalk.com/groups/parallaxscurioandrelicfirearmsforums/darne-shotgun-t23212.html where J.J. King also posts – that accounts for 3 of 25

    I just ordered a period brochure from Gunnerman that was described as Firearms Center Inc. Darne brochure.

    Curious if you have any other info.

    Reply

Leave a Reply to Administrator Cancel reply